|
Who's Online
There currently are 5814 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Good service manual,i saved from scrapping this deck,is now fully functional.Thanks.
;
Found this to be the manual included with the original packinging, was helpfull but did not give any detailed repair instructions.
;
Complete service manual, was very helpful in repairing this tapedeck.Thanks.
;
The service manual was a copy of the original from Wirlpool. The quality was good, all neccecary information was available including the service-codenumbers, so I could order the right part to be replaced for repair.
Downloding was no probem after the payment.
Thanks for the service!
;
Good,readable manual. I found other manuals that were not readable when it came to part ID, but the one downloaded from owner-manual.com was better than expected. I will do buisness with owner-manual.com again.
4
4 Align the arrows on the top of the cartridge and at the top of the slot. Slide the cartridge into the printer. Note If the cartridge does not slide completely into the printer, make sure that the color of toner in the cartridge matches the colored sticker on the slot.
5 5 Place one hand on the cartridge and use the other hand to pull the orange ring and remove the seal. Discard the seal. 6 Push the blue locking lever back to the left and close the carousel door. 6 Note If toner gets on fabric, wipe the toner off with a dry cloth and then wash the clothing in cold water. Heat will set toner into fabric. Note If the carousel door does not close, make sure that the blue lever is locked and that the seal has been completely removed from the toner cartridge. 7 Rotate the carousel to the two remaining slots (by closing the carousel door and pushing the carousel rotation button) and repeat steps 3 through 6 for each color. 8 Close the front door. CAUTION To prevent contamination or damage to the printer, do not move the printer after the imaging drum or any of the toner cartridges have been installed.
EN
Installing the consumables 89
|
|
|
> |
|